Minimum requirements:
- Basic tools - assorted screwdrivers, pliers etc.
- Soldering iron. Lead free solder, don’t breathe the fumes. Plenty ventilation while soldering.
- Battery operated or mains powered drill with accessories
- Multimeter to measure voltage and resistance
- Assorted screws, bits’n’pieces, wires (typical junk box items)
- A work bench or table, where you don’t have to worry about damaging the table.
- A patient spouse/partner (it will look messy and take a while - longer than you might think)
- Basic knowledge of how a Rife system works. There is no use in having a power tool if you can’t operate it properly. There are plenty of resources online, or get a copy of Nenah Sylver’s Rife Handbook: http://www.nenahsylver.com/
- An electric wall outlet with plenty amperage. For use in Europe/Asia on 220 volts, a 16 ampere socket is strongly recommended. This is explained here.
- If planning to mount everything in an enclosure: Dremel or equivalent type of tool will make it a lot easier and make it look better than just using a regular drill.