A length of high voltage wire 

To connect the power supply output to the PA3 HV input (high voltage input). The wire must be rated to handle the max voltage your tube will be using (my tube can be operated at 180 volts so I used cable rated for 220 volt). 

Length depends on your setup. I used 20 cm of lamp wire from a cable I had spare. Only 2 conductors are required (no grounding connection).

© Henrik Lorange 2015
Disclaimer: I do not receive any commission, kickbacks or any favors from vendors or sellers of these parts or systems. All information is provided as-is. build this at your own risk. rife tech might not work for your condition. do your own research first. No medical claims are made for this system whatsoever.